Utica Gas-fired Boiler Operations Instructions download pdf (Page 7)

After it has been determined each appliance remaining

connected to common venting system properly vents

when tested as outlined above, return doors, windows,

exhaust fans and any other gas-burning appliance to

their previous condition.

Any improper operation of common venting system

should be corrected so installation conforms with the

National Fuel Code, ANSI Z223.1/NFPA 54. When

resizing any portion of common venting system,

common venting system should be resized to approach

minimum size as determined using appropriate tables

in chapter 13 of the National Fuel Code, ANSI Z223.1/

NFPA 54.

Placing The Boiler

Place boiler to provide most direct connections to •

combustion air, vent, and system piping as possible.

Place crated boiler as close to selected location as •

possible and uncrate boiler.

Move uncrated boiler into position with appliance dolly •

or 2-wheel hand truck.

Insert dolly or hand truck under • right hand side of

boiler. It is possible to slide boiler for short distance on

smooth ﬂ oor or surface.

3 - LOCATING THE BOILER

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

No comments

Utica Gas-fired Boiler Operations Instructions Page 7